Take your new Chevy/Silverado 1500 to new heights with BDS. At the heart of this BDS 6" IFS system are a pair of 1/4" thick laser cut high clearance crossmembers to maximize clearance and provide a solid mounting point for the OE lower control arms. These paired with the 3-piece heavy duty front skid plate system create a rigid subframe while adding protection for vital steering and driveline components. In place of the factory steering knuckles a pair of specially designed ductile iron replacement steering knuckles are supplied to maintain proper steering geometry for ESC system compatibility while also allowing a wider range of wheel fitment options to include factory 20 wheels. These connect to the factory steering with a pair of heavy duty replacement tie rod ends included in the kit.The front differential is repositioned with BDS's multipoint relocation bracket system tying into the frame and control arm pockets to further secure the front differential to keep CV axle angles at a minimum. Additional ride height on this particular kit comes from a set of top mounted steel fabricated strut spacers to mount onto the factory strut assemblies.
A pair of BDS-branded sway bar drop brackets used to correct the operating angle of the factory sway bar as well as created a strong brace between the rear crossmember and the frame. Also supplied are new lower control arm cam bolts to allow alignment and a weld-in frame reinforcement plate for extra strength. In the rear lift blocks and longer u-bolts lift and level the stance and your choice of NX2 gas or FOX 2.0 performance series gas shocks are supplied to round out this kit allowing room for 35-37 tires to be installed. BDS NX2 series gas shocks offer impressive performance on and offroad. They use a nitrogen charged, twin tube design with 10-stage velocity sensitive valving for lightning fast dampening and superior control.Estimated Installation Time Is 8 hours. Will NOT fit MagneRide / Adaptive Ride equipped models. Factory 17" and 18" wheels cannot be reinstalled due to tie rod end interference, stock 20 wheels can be reinstalled. 17" Wheels with 4.5" backspacing should be test fit prior to mounting the tire to ensure proper clearance to the steering knuckle / tie rod. All aftermarket wheels should be test fit prior to mounting the tire to ensure proper clearance to the brake caliper. Some wheel profiles will not clear the brake caliper. These can be test fitted before the vehicle is lifted in a stock condition. Will NOT work with TrailBoss or AT4 models.
Will NOT work with 2019 1500 Classic models. Front skid plate will not work with 2.7L Turbo Engines.
37"x12.50" w/20x9 (Chevy) and 5.5"-6.25" back spacing. 35"x12.50" w/20x9 (Chevy) and 4.5"-5" back spacing. 35"x12.50" w/20x9 (GMC) and 5.5"-6.25" back spacing. For additional tire & wheel combinations refer to the instruction sheet.
Images are for representation purpose only and may differ depending on application. BDS Suspension operates with one guiding premiseto provide true value to the customer by engineering and manufacturing the highest quality aftermarket suspension lift kits , leveling kits and accessories for 4x4 off-road truck and Jeep enthusiasts. We distribute our products direct to the consumer from this website or through our international network of factory trained expert dealer/installers. We value your business and we are not satisfied until you are. Rudy's Performance Parts ships products from multiple warehouses across the country in order to get your products to you the quickest way possible.We are not able to send ANY race use products to the state of California. According to the EPA Clean Air Act, they are illegal for use on any Federal, State, or Local public highways and illegal use is punishable by the penalties enacted by the mentioned laws. Rudy's Performance Parts does not condone or promote illegal use of these products. All of our parts and accessories are returnable and refundable. The item in which you are returning MUST be unused, uninstalled, in the original condition, and in the original packaging. If you are returning an item due to an error caused by Rudys Performance Parts or its business partners i.
If you are sending an item back, we recommend using a service with tracking and signature confirmation. This product is NOT for sale or use in California. The item "BDS 6 Lift Kit With With NX2 Shocks For 2019-2020 Sierra/Silverado 1500 4WD" is in sale since Wednesday, October 23, 2019. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Suspension & Steering\Shocks & Struts". The seller is "rudys_performance_parts" and is located in Chapel Hill, North Carolina.This item can be shipped to United States, Canada.