Kryptonite Control Arms/Ball Joints/Tie Rods/Cam Kit For 11-19 GM 2500HD/3500HD

  
Kryptonite Control Arms/Ball Joints/Tie Rods/Cam Kit For 11-19 GM 2500HD/3500HD. Kryptonite Upper Control arms are made from laser cut steel, then machine formed and precision welded for ultimate strength. Also a great upgrade for your stock height truck.

Engineered exclusively for the extreme demands of today's heavy duty truck. Built with pride in the USA to work with stock or modified suspension. Kryptonite tie rods will fit any 2011- Current 2500/3500 GM HD Truck that has the center link mounted in the factory location.

Using superior components and engineering, these tie rods easily outperform the competition. This pair is for use with your factory center link. This Lower Ball Joint is designed specifically for heavy-duty use, they will handle the toughest work that you can throw at them while delivering excellent performance. This Ball joint has a durable Black Oxide Finishing on it to resist corrosion and maintain performance integrity. All of our ball joints and rod ends come pre-greased and ready to install with premium Chevron Ultra EP2 Grease. Replace your worn or broken upper control arm Cam Bolts with our heavy duty Kryptonite replacement kit. Proper Wheel Alignment is fundamental when trying to extend the tread life of your tires.

These pins replace the alignment pins in the GM vehicles listed. The pins make it easier to align the vehicle and often become bent or crushed and need to be replaced. This kit includes 8 pins, enough for both side. Includes outer tie rod ends. Compatible with most leveling and lift kits.

Precision welded control arms for ultimate strength. (2) Kryptonite Upper Control Arms.

(4) Kryptonite Control arm Bushing sleeves. (8) Kryptonite Control arm Bushings. (2) Kryptonite Bolt in Upper Ball joints. (2) Kryptonite Lower Ball joints. (2) Kryptonite Outer Tie Rod Ends.

(1) Kryptonite Cam Bolt Kit. (1) Kryptonite Cam Pin Kit.

When running stock wheels with oversized tires clearance is limited and may rub control arm. With the installation of an oversized Tie Rod, modification or alteration of the sway bar end link may be required.

When running a McGaughys lift you may need to modify or remove the lower bump stop bracket for clearance. Kryptonite Tie Rod Ends will not work with fabtech lift kits due to their proprietary spindle design that utilizes their outer tie rod. Kryptonite steering and suspension components are warrantied for life to their original purchaser.

Race it, jump it, off road it, wreck it, lift it, I think you get it? If you can break it we will replace it. We value your business and we are not satisfied until you are. All of our parts and accessories are returnable and refundable. The item in which you are returning MUST be unused, uninstalled, in the original condition, and in the original packaging.

If you are returning an item due to an error caused by Rudy's Performance Parts or its business partners i. If you are sending an item back, we recommend using a service with tracking and signature confirmation. WARNING: This product may contain chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. By requiring that this information be provided, Proposition 65 enables Californians to make informed decisions about their exposures to these chemicals. Proposition 65 also prohibits California businesses from knowingly discharging significant amounts of listed chemicals into sources of drinking water. Proposition 65 requires California to publish a list of chemicals known to cause cancer, birth defects or other reproductive harm. This list, which must be updated at least once a year, has grown to include approximately 900 chemicals since it was first published in 1987. Generally, parts which alter or modify the original design or performance of a motor vehicle pollution control device or system are NOT LEGAL FOR SALE OR USE IN CALIFORNIA or other states with similar regulations.

Such aftermarket parts are subject to governmental emissions standards regulated by the California Air Resources Board (CARB). In order for such parts to be legal for sale or use in the State of California, or other states with similar regulations, the part must acquire a CARB EO number so as to make it legal for use on a specific year/make/model of vehicle.

CARB approved parts will include a sticker containing the CARB EO number. This sticker must be displayed in a visible location in the vehicle's engine bay for smog inspections. Great product, just as described!

Always awesome dealing with Rudy's. Rudy's Performance Parts was founded in 2008 and prides itself in being the industry leader in automotive performance and accessories. Rudy's carries a wide variety of performance, suspension, exterior and interior upgrades!

Whether you're looking for a minor boost in performance, all-out drag racing and sled pulling power or a suspension upgrade to clear bigger wheels and tires, Rudy's has you covered! Known for the best customer service and pricing in the industry, there is no question that you've found your one stop shop for all of your automotive upgrades! This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Steering & Suspension\Control Arms, Ball Joints & Assemblies".

The seller is "rudys_performance_parts" and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, Korea, South, Indonesia, Taiwan, South Africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Croatia, Republic of, Malaysia, Brazil, Chile, Colombia, Panama, Jamaica, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Vietnam, Uruguay.

• Performance Part: No
• Country/Region of Manufacture: United States
• OE/OEM Part Number: 20924215, 19256656, 22913606, 11571268, 11571267, 11571266, 11571269
• Mounting Style: Bolt-On
• Interchange Part Number: Suspension A-Arms Leveling Kit 2WD 4WD OEM Torsion, Chevy Chevrolet GMC Sierra Silverado 2500 3500 6.6, Duramax 6.6 6.6L Vortec 6.0 6.0L Gas Diesel, 11 12 13 14 15 16 17 2011 2012 2013 2014 2015 2016, 2500 3500 2500HD 3500HD LML L5P 2017 Cognito, 33\
• Material: Alloy Steel
• Type: Control Arm Kit
• Features: 100% Accuracy of Fit, Easy to Replace, Greasable, Heavy Duty, No Drilling Required
• Manufacturer Part Number: KRUCA11, (2) KR0232, KRTR11, KR86376, KR86326
• Vintage Part: No
• CA Proposition 65 Warning: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
• Universal Fitment: No
• Placement on Vehicle: Front, Left, Lower, Outer, Right, Upper
• Brand: Kryptonite
• Manufacturer Warranty: Lifetime
• Cotter Pin Hole: Yes
• Items Included: Bolt Kit, Bolts, Boot, Bushing